GoldGel Filing Stop – 03

FILING STOP - NO LIMAGE CONSTRUCTION GEL

NO LIMAGE is yours!

THE ADVANTAGES OF NO FILING

- Save time on your daily work
- Little or no filing*
- Less dust
- Less muscle/joint fatigue
- Less material used during application = lower purchasing costs

*: Depending on your technical know-how and the placement of the material during application. Perfectly applied, our FILING STOP gels require no additional shaping. However, if you wish, you can use a polishing block to remove the sticky residue.

In the event of poor material placement, it's perfectly possible to shape your construction with a file or sander, just like a conventional gel.

APPLICATION PROTOCOL*

- Prepare the natural nail plate
- Apply a base coat, catalyze
- Using an Oval Brush, apply a very thin coat of Filing Stop without catalyzing
- Take the required amount of Filing Stop and apply at the apex
- Using a Liner Brush, pull the material up, down and sideways from the center, taking care not to touch the apex
- Turn your finger over if necessary to reshape the apex and let gravity work for you;-)
- Catalyze once the result is correct

* : Our application protocols are not a substitute for training. Contact one of our Training Centers to learn the complete and detailed NO LIMAGE protocol.

INSTRUCTIONS FOR USE

As with ALL medium/fluid viscosity technical products:

- Applied too thickly and depending on your lamp type, Filing Stop may not catalyze deeply. Test the catalyzing capacity of our gel under your lamp (excluding NOX) before any customer application.

- If you apply too much, Filing Stop may leak , depending on how quickly you work. If you're not used to this type of texture, practice on a model or on your own before applying to customers .

- The viscosity of gels varies according to ambient temperature. They liquefy in the heat and compact in the cold: keep your gels in an environment of around 25°C and adapt your technique to the ambient temperature of your room/season .